You are here: Home » NEWS » Company news

Tel:0086-512-58532180 (Monday to Friday 9:00 - 17:30

Email:shadow@stplas.com

Address:Room B612, NO.115 Shazhou East Road (Tianba Business Hall) ,Yangshe Town, Zhangjiagang, Jiangsu, China

Company news

Precautions for the operation of plastic bottle shredding machine

  • Views:0
  • Author:
  • Publish Time: 2021-02-02

The plastic bottle shredding machine is specially designed for the crushing of mineral water bottles, beverage bottles, plastic bottles and preforms. Because most of the raw materials of beverage bottles, mineral water bottles and preforms are PET, it is easy to generate static electricity after friction, so that the crushed The bottle flakes adhere to the cutter and the screen, making it difficult to unload. STPLAS plastic bottle crusher series uses high-speed steel laminating knives, using the super hardness of the knives to enhance the cutting function, and the screen is treated with hard chrome plating. At the same time, because the cylindrical hollow bottle is easy to bounce in the crushing chamber during the crushing process, it cannot be crushed. The plastic bottle shredder adopts a hollow knife holder, so that the knife can have a larger rotating diameter during the rotation process, tightly hug the bottle body, crush and cut, so that the crushing is more smooth.

图片1.jpg

Precautions for the production and operation of plastic bottle shredding machine:

1. Look at the direction of rotation of the impeller of the plastic bottle crusher from the feed port. The impeller of the flying knife should rotate counterclockwise. If it rotates clockwise, check the motor connection line;

2. If equipped with an automatic feeding conveyor, the feeding should be stopped immediately when the conveyor stops running, because the conveyor should be interlocked with the feeding system to open and stop, otherwise the impeller will be crushed, thereby burning the motor or causing equipment Damage

3. The plastic bottle crusher must be continuous and uniform during the feeding process. Do not feed materials larger than the specified size. When large materials are found, they should be removed in time, otherwise it will cause imbalance of the impeller and excessive wear of the impeller, or even cause The crusher is stuck, making the crusher unable to work normally and burning the motor;

4. There are severe vibrations and abnormal noises during the operation of the crusher, so it should be stopped for inspection immediately, and it can work again in order after the fault is removed.


Related Products

Contact Us

If you need one to be possible the long-term cooperation and the trust work team, then please contact with us, we anticipated that you come the electricity, thanks!

©2018 STPLAS MACHINERY All Rights Reserved

Designed by daweitec.com

sitemaps